03/01 Instruments
03.22140.000 Small Fragment Instrument & Implant Case
 |
| REF | Quantity | Designation |
|---|---|---|
| 03.22130.001 | 1 | Graphic tray |
| 03.22130.003 | 1 | Lid for graphic tray |
| 03.20010.025 | 2 | Drill bit 2.5 mm, 110 / 85 mm |
| 03.20010.035 | 2 | Drill bit 3.5 mm, 110 / 85 mm |
| 03.20020.035 | 2 | Tap for 3.5 mm cortex screws |
| 02.20020.040 | 2 | Tap for 4.0 mm cancellous screws |
| 02.20030.027 | 1 | Countersink 2.7 mm / 4.0 mm |
| 03.20040.025 | 1 | Screwdriver 2.5 mm hex |
| 03.20040.125 | 1 | Screwdriver shaft 2.5 mm hex |
| 03.20050.035 | 1 | T-handle, quick coupling |
| 03.20060.025 | 1 | Double drill sleeve 2.5 mm / 3.5 mm |
| 03.20060.125 | 1 | Insert drill sleeve 2.5 mm / 3.5 mm |
| 03.20060.135 | 1 | Drill guide neutral & load 3.5 mm |
| 03.20070.131 | 1 | Reduction forceps, broad, 130 mm |
| 03.20070.132 | 1 | Reduction forceps with point, 130 mm |
| 03.20070.133 | 1 | Reduction forceps, teethed, 140 mm |
| 03.20070.190 | 1 | Verbugge forceps, 190 mm |
| 03.20080.006 | 1 | Periosteal elevator 6 mm, round edge |
| 02.20090.008 | 2 | Hohmann retractor 8 mm |
| 02.20090.015 | 2 | Hohmann retractor 15 mm |
| 03.20100.060 | 1 | 60 mm depth gauge |
| 03.20110.035 | 1 | Bending iron 2.7 mm / 3.5 mm right |
| 03.20110.135 | 1 | Bending iron 2.7 mm / 3.5 mm left |
| 02.20120.005 | 1 | Sharp hook |
| 02.20110.160 | 1 | Wire bending forceps, 160 mm |
Further Products
- Drill Bit ø 2.5mm, 2-flute, for Quick Coupling, L 110/85mm
- Drill Bit ø 3.5mm, 2-flute, for Quick Coupling, L 110/85mm
- Tap ø 3.5mm for Mini Quick Coupling, L 110/180mm
- Tap ø 4.0mm for Mini Quick Coupling, L 60/110mm
- Countersink 2.7/3.5/4.0 for Quick Coupling
- Screwdriver hexagonal, small, hex 2.5mm
- Screwdriver Shaft, hex 2.5mm, for Quick Coupling
- T-Handle with Quick Coupling
- Holding Sleeve for Screws ø 3.5/4.0mm
- Double Drill Guide 3.5/2.5
- Double Drill Guide 3.5/2.5
- Drill Guide 3.5, for neutral and load
- Reduction Forceps with Points, wide, ratchet lock, L 130mm
- Reduction Forceps with Points, ratchet lock, L 130mm
- Reduction Forceps, toothed, ratchet lock, L 140mm
- Bone Holding Forceps, self-centering, speed lock, L 190mm
- Periosteal elevator 6 mm, round edger
- Bone Lever, narrow tip, width 8mm, L 160mm
- Bone Lever, width 15mm, L 160mm
- Depth gauge 60mm
- Bending Template for Compression Plate 3.5, 7 holes
- Bending Template for Compression Plate 3.5, 9 holes
- Bending Iron for Plates 2.7 to 3.5, rechts
- Bending Iron for Plates 2.7 to 3.5, links
- Screw Forceps, self-holding
- Wire bending forceps 160 mm
- Handle, quick connect
- Sharp hook
- Small Fragment Instrument & Implant Case
MARQUARDT MEDIZINTECHNIK
Products for spinal column and osteosynthesis